I’ve posted about this before but hadn’t quite got the hang of it until recently. The first two images resulted from tutorials I found, and the third image is an idea I have for a website – an embossed piece of text (the brand name?) on a neutral background could look really good with some black and white/light grey body text. There are two versions of debossing I managed to make – the first is more like a cut-out and the second is a soft impression.
Sunday, 21 March 2010
Fiery text – from online tutorial
I’ve been neglecting my photoshop skillz a little lately, so I checked out a few online tutorials. One I came across was on a handy blog that I follow – http://pkphotoshop.blogspot.com/ This effect is great – not too difficult either, with some clever shortcutting.
Tuesday, 16 March 2010
Jazzed up lettering
Spruced up one of my letter designs…may have to swot up on Photoshop and try a shiny 3D version too.
Friday, 12 March 2010
Another golden pentagram construction
Here’s a nifty little way to draw up a set of golden pentagrams – which are, between themselves, proportional by 1:1.618. I’ve not seen this method elsewhere…and there’ll be loads of ways to construct these shapes but I find this one quite enjoyable to work through.
Where other methods I’ve found (have a look in the February posts) have begun with the golden rectangle, this one begins with a square. The key to drawing the five-points of the pentagram (five-point star) on a circle’s circumference is obviously in figuring out the split of the circumference by 5 (5 equidistant points after all). So we need to be able to chop a circle into 5 equal angles without using measuring tools.
Beginning with a square, we draw a circle whose centre is at the corner with a radius equal to the square’s length. Then we extend the square into the circle by making it a golden rectangle, as described in the second image below.
In the third image we have our special measurement (the dashed line) – one that will cut our circle into 5 equal parts. It happens to be the diagonal measurement inside the segment by which we extended the square. Continue the line, in a circle, to the edge of the main circle. At this point it doesn’t matter where we put our compass – you’ll notice the end result is a pentagram on its side so if you want one with a horizontal base, place the compass at the top of the circle’s circumference in the centre, instead of at the square’s corner.
We’ll make two new points on the circumference by continuing the line right round. These points mark where we’ll put the compass to make further guides. The fourth and fifth images show this process – and we get a beautiful shape at the end of it…a sort of bloated group of diminishing pentagrams and pentagons.
In the last image, the points are simply drawn together with straight edges. The conclusion is an image that harvests squares, triangles, circles, pentagrams and pentagons all in a number of sizes in proportion of the ratio 1:1.618. Further points can be joined, more lines extended and even more interesting patterns uncovered.
Where other methods I’ve found (have a look in the February posts) have begun with the golden rectangle, this one begins with a square. The key to drawing the five-points of the pentagram (five-point star) on a circle’s circumference is obviously in figuring out the split of the circumference by 5 (5 equidistant points after all). So we need to be able to chop a circle into 5 equal angles without using measuring tools.
Beginning with a square, we draw a circle whose centre is at the corner with a radius equal to the square’s length. Then we extend the square into the circle by making it a golden rectangle, as described in the second image below.
In the third image we have our special measurement (the dashed line) – one that will cut our circle into 5 equal parts. It happens to be the diagonal measurement inside the segment by which we extended the square. Continue the line, in a circle, to the edge of the main circle. At this point it doesn’t matter where we put our compass – you’ll notice the end result is a pentagram on its side so if you want one with a horizontal base, place the compass at the top of the circle’s circumference in the centre, instead of at the square’s corner.
We’ll make two new points on the circumference by continuing the line right round. These points mark where we’ll put the compass to make further guides. The fourth and fifth images show this process – and we get a beautiful shape at the end of it…a sort of bloated group of diminishing pentagrams and pentagons.
In the last image, the points are simply drawn together with straight edges. The conclusion is an image that harvests squares, triangles, circles, pentagrams and pentagons all in a number of sizes in proportion of the ratio 1:1.618. Further points can be joined, more lines extended and even more interesting patterns uncovered.
Wednesday, 10 March 2010
Lettering
I’ve been hand-drawing some type recently – and looking closer at my favourite typefaces, Univers and Futura – and I remembered I’ve yet to get comfortable drawing the ‘s’. So I decided not to leave my desk until I managed to get something decent drawn.
Here’s the result below. I compared it with the Futura and Univers characters afterwards and thought it struck quite a nice contrast. My letter is a little bottom heavy because of the grid I used – I did put form before function tbh (I used golden proportions between the lower and upper circular parts) It may be worth continuing but for now I’m happy I’ve sussed the ‘s’ to some extent.
I found it useful in Illustrator to zoom right out from the letter to make sure it was working at a small scale – as you would with a logo, for instance. Playing around with the stroke size also helps – making it really thin/fat will uncover any errors in the curves.
Here’s the result below. I compared it with the Futura and Univers characters afterwards and thought it struck quite a nice contrast. My letter is a little bottom heavy because of the grid I used – I did put form before function tbh (I used golden proportions between the lower and upper circular parts) It may be worth continuing but for now I’m happy I’ve sussed the ‘s’ to some extent.
I found it useful in Illustrator to zoom right out from the letter to make sure it was working at a small scale – as you would with a logo, for instance. Playing around with the stroke size also helps – making it really thin/fat will uncover any errors in the curves.
Sunday, 7 March 2010
Renaissance painting aids
I recently read that many Renaissance artists, including Dürer and Leonardo, would use grids to aid them in their composition – rectangular wooden frames with wire drawn through them in a grid form. They would place the frame between themselves and their subject on a stand. If there is a technical name for them I’ve forgotten it but I’ll edit this post if I find it.
Reading this made me realise how little, if any, ’artistic expression’ was actually sought in Renaissance painting on the part of the painter himself. Everything seems to have been for documentation’s sake. Much of Leonardo’s work was, after all, either commissioned or part of research. In other words, all of it was a record of some sort, be it a fresco of the Battle of Anghiari or a portrait of some rich man’s wife. Even in paintings of the Holy Family artists would include the portraits of high-ranking officials or rulers as a nod to their greatness! That’s like writing Gordon Brown into a pop song. To think that people now would fork out millions for something that was dragged around Italy in a cart 600 years ago is a little strange (I’m thinking of the Mona Lisa). Something I just can’t buy into is all of the mysticism that people read from these paintings – the Culture Minister Kim Howell summed it up well in his comment on some Turner Prize entries, ‘conceptual bullshit’. Surely it’s enough to accept that many people in the Renaissance were simply highly skilled, intelligent men who documented the world around them with precision and necessity rather than lofty principles or self-expression.
[Addition 7 March]
I just read that Leon Battista Alberti, a Renaissance scholar who wrote a treatise called On Painting, actually invented his own painting aid – a translucent cloth or veil with a grid of squares which would be placed between the artist and his subject.
He is also said to have suggested using a mirror to consult paintings and highlight any errors in perspective or relations between objects. I’ve noticed a similar thing myself in regard to typography – in turning a piece of text upside down your eye is no longer distracted by meaningful shapes and you can more readily notice awkward letter-spacing. I’m sure Leonardo d.V. would have used the mirror technique to check his works – considering he did, at one time, read Alberti’s books, that he made use of painting aids and that he used mirrors to write in his notebooks.
Reading this made me realise how little, if any, ’artistic expression’ was actually sought in Renaissance painting on the part of the painter himself. Everything seems to have been for documentation’s sake. Much of Leonardo’s work was, after all, either commissioned or part of research. In other words, all of it was a record of some sort, be it a fresco of the Battle of Anghiari or a portrait of some rich man’s wife. Even in paintings of the Holy Family artists would include the portraits of high-ranking officials or rulers as a nod to their greatness! That’s like writing Gordon Brown into a pop song. To think that people now would fork out millions for something that was dragged around Italy in a cart 600 years ago is a little strange (I’m thinking of the Mona Lisa). Something I just can’t buy into is all of the mysticism that people read from these paintings – the Culture Minister Kim Howell summed it up well in his comment on some Turner Prize entries, ‘conceptual bullshit’. Surely it’s enough to accept that many people in the Renaissance were simply highly skilled, intelligent men who documented the world around them with precision and necessity rather than lofty principles or self-expression.
[Addition 7 March]
I just read that Leon Battista Alberti, a Renaissance scholar who wrote a treatise called On Painting, actually invented his own painting aid – a translucent cloth or veil with a grid of squares which would be placed between the artist and his subject.
He is also said to have suggested using a mirror to consult paintings and highlight any errors in perspective or relations between objects. I’ve noticed a similar thing myself in regard to typography – in turning a piece of text upside down your eye is no longer distracted by meaningful shapes and you can more readily notice awkward letter-spacing. I’m sure Leonardo d.V. would have used the mirror technique to check his works – considering he did, at one time, read Alberti’s books, that he made use of painting aids and that he used mirrors to write in his notebooks.
Saturday, 6 March 2010
Book: ‘The Divine Proportion: A Study in Mathematical Beauty’ by H.E. Huntley
I got this book the other day – along with a few other £5 gems on Amazon – and found it a really good buy. I posted Ghyka’s book, The Geometry of Art and Life, before and, although it was a good collection of examples of where the golden section comes into play, I still wanted to actually learn more about Phi.
This book was ideal for getting a better understanding of the numbers themselves and how everything works together. It was written in the ‘70s and there is quite an amusing passage where the author discusses a computer, which he needed permission to use, that could give him the answer to an enormous calculation he was making. If only he knew how much easier it would become in a decade or two. Still, one of the points he makes in the book is that there is still much to be uncovered about the ‘beauty of maths’ and, with the constant evolution of technology, this is no doubt true today.
The book covers the golden section/divine proportion/Phi in a vast array of drawings and calculations. Some of the mathematics is a little advanced for a modest GCSE-level pleb like myself, and Huntley happily points that out in his book, but with his equations in front of you, it isn’t difficult to learn the necessary parts of algebra involved.
I love the way Huntley writes the book – it’s seriously in-depth and yet light-hearted and personal. He makes a great attempt at rationalizing the idea of beauty and why Phi is the most pleasing formula to the human eye. Is it that you learn to love home, and home happens to be the world in which Phi plays so big a role? Or is it subjective?
Huntley makes the point that beauty may indeed be in the eye of the beholder but there are two levels to our perception of beauty. One is inborn in us all – that sense of ‘judging the book by its cover’. Then there is ‘acquired’ understanding of beauty which means that we find beauty through education – I can vouch for this in some ways: I remember an art history lesson involving a painting of Napoleon. I saw the quite plain-looking painting and got quite bored with it until my teacher pointed out the humour behind the image – the artist had an agenda – propoganda – and had therefore added a quite large shadow to the figure’s crotch, basically indicating he was well-hung as if to say ‘he’s the daddy’! Being a dippy teenager, I found this hilarious and have remembered that piece of information ever since. So, because I know that little fact, I feel more attached to the painting – even more so than, say, the Eiffel Tower because even though the latter is more immediately beautiful, I have the ‘acquired knowledge’ in Napoleon’s portrait and it works as added beauty.
Huntley talks about poetry and music and relates the two to the golden section – apparently in music there are time intervals which interact with the body’s internal clock in such a way that we find them the most pleasing of all. This interval happens to be in direct relation to Phi, telling us that the golden section has a claim to us humans more intrinsic than that which was illustrated by Renaissance artists with the human body, namely a connection to the soul itself.
Huntley quotes Francis Thompson to make a point for those who put little value in the matters that he discusses in the book (for lack of education or knowledge, as he argues):
The angels keep their ancient places;
Turn but a stone and start a wing!
‘Tis ye, ‘tis your estrangéd faces,
That miss the many-splendoured thing.
This book was ideal for getting a better understanding of the numbers themselves and how everything works together. It was written in the ‘70s and there is quite an amusing passage where the author discusses a computer, which he needed permission to use, that could give him the answer to an enormous calculation he was making. If only he knew how much easier it would become in a decade or two. Still, one of the points he makes in the book is that there is still much to be uncovered about the ‘beauty of maths’ and, with the constant evolution of technology, this is no doubt true today.
The book covers the golden section/divine proportion/Phi in a vast array of drawings and calculations. Some of the mathematics is a little advanced for a modest GCSE-level pleb like myself, and Huntley happily points that out in his book, but with his equations in front of you, it isn’t difficult to learn the necessary parts of algebra involved.
I love the way Huntley writes the book – it’s seriously in-depth and yet light-hearted and personal. He makes a great attempt at rationalizing the idea of beauty and why Phi is the most pleasing formula to the human eye. Is it that you learn to love home, and home happens to be the world in which Phi plays so big a role? Or is it subjective?
Huntley makes the point that beauty may indeed be in the eye of the beholder but there are two levels to our perception of beauty. One is inborn in us all – that sense of ‘judging the book by its cover’. Then there is ‘acquired’ understanding of beauty which means that we find beauty through education – I can vouch for this in some ways: I remember an art history lesson involving a painting of Napoleon. I saw the quite plain-looking painting and got quite bored with it until my teacher pointed out the humour behind the image – the artist had an agenda – propoganda – and had therefore added a quite large shadow to the figure’s crotch, basically indicating he was well-hung as if to say ‘he’s the daddy’! Being a dippy teenager, I found this hilarious and have remembered that piece of information ever since. So, because I know that little fact, I feel more attached to the painting – even more so than, say, the Eiffel Tower because even though the latter is more immediately beautiful, I have the ‘acquired knowledge’ in Napoleon’s portrait and it works as added beauty.
Huntley talks about poetry and music and relates the two to the golden section – apparently in music there are time intervals which interact with the body’s internal clock in such a way that we find them the most pleasing of all. This interval happens to be in direct relation to Phi, telling us that the golden section has a claim to us humans more intrinsic than that which was illustrated by Renaissance artists with the human body, namely a connection to the soul itself.
Huntley quotes Francis Thompson to make a point for those who put little value in the matters that he discusses in the book (for lack of education or knowledge, as he argues):
The angels keep their ancient places;
Turn but a stone and start a wing!
‘Tis ye, ‘tis your estrangéd faces,
That miss the many-splendoured thing.
Thursday, 4 March 2010
Max Bill’s circle
I tried using phi to make the yellow circle, instead of the 0.5 that Bill used, and found that the first version (second image) is a little less well-balanced in comparison with the original. The second version, however, (last image) I think is pretty successful. The smaller the circle, the more the text box comes up – which is what you’d want on a poster. The image would still be seen first from a distance.
I’m assuming Bill was making a geometrical representation of a Zulu shield with his image (the words ‘negerkunst’ and ‘sudafrikas’ are a clue straight away). The smaller version of the circle, then, would perhaps make more sense. It gives the image more space and is clearly smaller than the text box – avoiding any conflict between the two shapes.
No idea why the colours are faded on this screen but if you click on the image, it’s better.
I’m assuming Bill was making a geometrical representation of a Zulu shield with his image (the words ‘negerkunst’ and ‘sudafrikas’ are a clue straight away). The smaller version of the circle, then, would perhaps make more sense. It gives the image more space and is clearly smaller than the text box – avoiding any conflict between the two shapes.
No idea why the colours are faded on this screen but if you click on the image, it’s better.
Nothing accidental: Graphic Design
I worried that all of my geometrical ‘constructions’ may be misinterpreted so the following examples of geometry used in design may put things into perspective. The point of making those constructions, like the golden circles, pentagrams and so on, is to find methods of drawing proportionally-related shapes without measuring anything (cheating?). Doing that will make it easier to understand how proportion works and also allows you to work out interesting layouts or even grids.
I have, in fact, stolen the examples below from a book about geometry in design (by K. Elam, which I’ve posted about before). They may be a little aged but the two were done 50 years apart and geometric proportion will never be irrelevant to graphic design. The posters are ‘Folies-Bergère’ by Jules Chéret and ‘Negerkunst’ by Max Bill, respectively. I think I’ve added to Elam’s analysis of Bill’s work here because she credits much of it on root 2 proportions – I found that the golden section works on it quite strongly.
In ‘Folies-Bergère’, then, we can see from an immediate use of rectangles which are smaller than the frame by phi (golden section=1.618) that the three characters are divided by these measurements. The second image shows a pentagram (five-point star) within a pentagon within a circle. The whole object is central in the frame. The edges of the pentagon are of a measurement which is equal to the frame breadth/1.618 (phi). In other words, the artist, presumably, used a pentagon whose sides relate to the frame breadth by the golden section. The pentagon works as the master guide – marking where the text will sit (above and below), and informing the angle of the dancer’s legs and the position of the elbow.
Bill ’s poster is a little more complicated but the images I have made here should speak for themselves. If you divide the non-golden rectangular frame by 1.618 you get rectangle A. It isn’t always necessary to work inside an area relative to the golden section but probably an advantage. I’ve wondered why Bill chose to position the shape where it is and can only suggest it is the mid-point of rectangle A when turned on its side. Turning it this way will not affect the proportions in use.
Divide rectangle A by 1.618 and you get the measurement used by Bill to draw his text box. The text box is actually square but this is still proportional to the rest because a square is a phi rectangle with a phi² rectangle next to it. (Phi² is 2.618, as opposed to 1.618 and therefore makes for a slimmer rectangle). Squares mean ‘1’ and are therefore neutral in terms of proportion. The text box is aligned by its left side to the centre of the circle above and is therefore a little cushioned from the edge. Bill may have chosen to move it up from the lower edge also – to give it some ‘breathing space’.
The size of the circles was a little unclear to me at first. The shape in the poster is basically two big circles placed in such a way that a circle of half their size fits into the area where they overlap. The large circle is, as shown, the difference between the corners of rectangles A and B. The smaller circle, as mentioned, is half the size. Why Bill chose to make the smaller circle half the size is a slight mystery. Halfs, in proportion, are known as ’static’ proportions because they fail to give aesthetically pleasing results. Phi, meanwhile, is a ’dynamic’ number because it gives proportions which are both systematic and beautiful.
The reason Bill chose to use a static proportion for the small circle may be because the exhibition was about art which used these proportions (and his geometric shape is a representation) or because using phi may make the shape conflict with the text box. I may re-design it by using only dynamic proportions, just to see what happens….
I have, in fact, stolen the examples below from a book about geometry in design (by K. Elam, which I’ve posted about before). They may be a little aged but the two were done 50 years apart and geometric proportion will never be irrelevant to graphic design. The posters are ‘Folies-Bergère’ by Jules Chéret and ‘Negerkunst’ by Max Bill, respectively. I think I’ve added to Elam’s analysis of Bill’s work here because she credits much of it on root 2 proportions – I found that the golden section works on it quite strongly.
In ‘Folies-Bergère’, then, we can see from an immediate use of rectangles which are smaller than the frame by phi (golden section=1.618) that the three characters are divided by these measurements. The second image shows a pentagram (five-point star) within a pentagon within a circle. The whole object is central in the frame. The edges of the pentagon are of a measurement which is equal to the frame breadth/1.618 (phi). In other words, the artist, presumably, used a pentagon whose sides relate to the frame breadth by the golden section. The pentagon works as the master guide – marking where the text will sit (above and below), and informing the angle of the dancer’s legs and the position of the elbow.
Bill ’s poster is a little more complicated but the images I have made here should speak for themselves. If you divide the non-golden rectangular frame by 1.618 you get rectangle A. It isn’t always necessary to work inside an area relative to the golden section but probably an advantage. I’ve wondered why Bill chose to position the shape where it is and can only suggest it is the mid-point of rectangle A when turned on its side. Turning it this way will not affect the proportions in use.
Divide rectangle A by 1.618 and you get the measurement used by Bill to draw his text box. The text box is actually square but this is still proportional to the rest because a square is a phi rectangle with a phi² rectangle next to it. (Phi² is 2.618, as opposed to 1.618 and therefore makes for a slimmer rectangle). Squares mean ‘1’ and are therefore neutral in terms of proportion. The text box is aligned by its left side to the centre of the circle above and is therefore a little cushioned from the edge. Bill may have chosen to move it up from the lower edge also – to give it some ‘breathing space’.
The size of the circles was a little unclear to me at first. The shape in the poster is basically two big circles placed in such a way that a circle of half their size fits into the area where they overlap. The large circle is, as shown, the difference between the corners of rectangles A and B. The smaller circle, as mentioned, is half the size. Why Bill chose to make the smaller circle half the size is a slight mystery. Halfs, in proportion, are known as ’static’ proportions because they fail to give aesthetically pleasing results. Phi, meanwhile, is a ’dynamic’ number because it gives proportions which are both systematic and beautiful.
The reason Bill chose to use a static proportion for the small circle may be because the exhibition was about art which used these proportions (and his geometric shape is a representation) or because using phi may make the shape conflict with the text box. I may re-design it by using only dynamic proportions, just to see what happens….
Sunday, 28 February 2010
Thursday, 25 February 2010
Stranger Than Fiction graphics
I watched Stranger Than Fiction again earlier today and realized I haven’t mentioned it on here yet. If you haven’t seen it, it’s well worth a watch. It’s definitely something that creative people would find interesting if only for the visuals. Will Ferrell gives a great performance as the low-key main character and Dustin Hoffman and Emma Thompson are also brill.
The film is about a man whose job requires him to be very good with numbers and, as a result, he counts/measures everything he sees in passing. The story itself, however, is about how he is the main character in a book that’s being written – he begins to hear the author narrating his actions as he goes about daily life and we eventually learn whether he is controlling himself or not.
Throughout the film there’s a layer of really clean, crisp, white animated graphics that playfully illustrate Harold’s (the main character’s) thoughts – his counting of steps or measurements of soap in its dispenser. What’s so good about it is that it very quietly persists with the scrupulously systematic nature of the main character without distracting the audience or becoming exhaustive. MK12 are the designers behind it: I’ve added images below of: their early ideas – which, thankfully, were dropped; the MK12 banner; and some screenshots of the final outcome, as seen in the film.
The film is about a man whose job requires him to be very good with numbers and, as a result, he counts/measures everything he sees in passing. The story itself, however, is about how he is the main character in a book that’s being written – he begins to hear the author narrating his actions as he goes about daily life and we eventually learn whether he is controlling himself or not.
Throughout the film there’s a layer of really clean, crisp, white animated graphics that playfully illustrate Harold’s (the main character’s) thoughts – his counting of steps or measurements of soap in its dispenser. What’s so good about it is that it very quietly persists with the scrupulously systematic nature of the main character without distracting the audience or becoming exhaustive. MK12 are the designers behind it: I’ve added images below of: their early ideas – which, thankfully, were dropped; the MK12 banner; and some screenshots of the final outcome, as seen in the film.
Wednesday, 24 February 2010
Monday, 22 February 2010
Diary images for Anna
Here’s the Russian Diary I have. On every other page is an image taken from 20s/30s Soviet children’s books – many of them look more like sophisticated constructivist works though so don’t let ‘children’s books’ throw you off. Really nice collection anyway. The right hand pages could be better, I think.
Sunday, 21 February 2010
Müller-Brockmann’s Grids in InDesign
This post is partly a note-to-self but could also be handy for anyone wanting to set up grids in InDesign or understand more about how type and leading works.
Having read his book on grid systems, I wanted to try M-B’s grid set-ups and, in doing so, noticed something that’s maybe worth pointing out. The text in M-B’s grids always seems to sit very comfortably into the grid line corners, whether it’s a capital in a larger size or small body copy. In his day, typographers would always sketch out words/titles/paragraphs so there’s a difference between drawing text by hand to sit on the baseline and extend to the edge of the grid line and getting a type size on InDesign that will do the same thing (without going into decimal points).
Also, many designers will either choose to align images with the x-height of the type (the top of the letter ‘x’ from the baseline, in other words) or to align images with the ascender line/cap height (whichever is highest). The latter is M–B’s method and ensures that the top of any images will line up with the top of any lettering that may be alongside it on the page. This is my preference also – more simple and better looking.
I got into confusion at first when setting up some grids because of the point size system. The point size is not actually the size of the lettering itself but of the metal shapes that were used in letterpress originally. This explains why there’s a mysterious little bit of leading still in on the screen when you type with 10/10 type (size 10/10 leading). If the leading value is equal to the size it means there should really be no leading – no space between the lines of text. However, because there is a tiny bit, it means you have to make lots of calculations to get the grid working if you don’t deal with it first.
So, as it’s the modern world and letterpress is but a fragment of the old, it’s time to tech-up and get rid of unwanted leading.
Say we want a column of text. There are to be 59 lines. We want 5 fields with a one-line break between each. So we take away 4 from 59 because we need them as spaces, and are left with 55 lines (11 lines per field).
We want to use Univers size 10 with 2pt of leading (12 in the InDesign tab). Remembering that point size is not type size, we need to measure the text. So write a line in Univers size 10 making sure to use caps/ascenders and descenders in the sentence (something like HPSklpgj). Then use type>create outlines. This makes the sentence an object. You can check out the height of the object (which should (?) be equal to 10 points, but it’s not) in the bar at the top. It’ll be about 3.305mm. If you then search google for ‘3.305mm in points’ you’ll get 9.368…which isn’t 10. Thus, the confusion is thwarted!
We can then make a rectangle whose length is irrelevant and whose height is 3.305mm (or convert the outlined text to a rectangle) and what we have is the corner of the grid – whose height means it will touch the top of the ascenders and the base of the descenders. The baseline will have to pass somewhere through this area for the line to sit on – this is worked out later. For now, we can duplicate the shape underneath to get a second line without leading. To add 2pt leading, go to the ‘y’ measurement for the shape below and type in ‘+2pt’ after what is already there. This should push the object down by 2 pt – leaving a 2pt gap. If you do this 59 times, you’ll get the grid height. After every 11, there’ll be a shape that signifies the space between fields – text/images can still fill it but nothing should align on it – that’s what the fields are for.
So, as it’s the more simple number, we’ll use 3.305mm as our guide. If our baselines re-occur every 3.305 our text will sit tightly with no leading (because it is the full measurement from descender to ascender). We need to add leading (2pt leading) so we type in ‘3.305mm+2pt’ in the baseline menu (under preferences) and it gives you a deeper baseline.
Now that your baseline is at the right measurement (with 2pt leading added) you can type away in Univers size ‘10’ (9.368). The leading will be 2pt but InDesign will want to make it a tiny bit more which is why you need to select 11 (rather than 12 – even though that is what we’re after) on the leading bar when ‘align to baseline’ is ticked. Making sure everything is aligned to the baseline is key though.
So now our baseline is the right measurement but will not be aligned to our grid properly. Aligning it to the grid will make sure the text sits comfortably right up to the edges of the fields. Let’s say the big list of 59 rectangles we made – with 2pt leading between – is all one object. Have it sitting 20mm from the top of the page (y measurement). Type in 20mm in the baseline menu to make it begin there. Now we need a measurement to add to that so that the baseline sits inside our rectangles and the text touches the top and bottom of them all as a result. Going back to our outline object of the text, take a measurement of the highest ascender/cap height (so the height of an ‘h’ perhaps, or capital T). I got 2.6mm. Add this to the baseline start-measurement so it’s 22.6mm and you’ll see all the text shift so that everything sits inside each rectangle. Done.
The edges of the rectangles are where images should align and so on but these can be removed once you draw a grid around them. It’s a slightly tricky process to get your head around but if you rely on making your own measurements and not on InDesign, you’ll find it’s not so technical. Remember, though, that all of your text/images and design decisions should be made before drawing up the grid so you don’t have to re-do the whole thing in order to make amendments.
Wednesday, 17 February 2010
Tuesday, 16 February 2010
Proportion in typography
When I was writing the Seurat post I mentioned that, in that incidence, the difference between one number, 1.618 (the golden section) and another, 1.414 (DIN paper system), didn’t make much difference. In other examples, though, it will, and below shows how.
I’ve used the Fibonacci sequence for a long while as a guide to my type sizes because, when I was just starting out in using type in my designs at uni, I read it would give me the most pleasing proportions. It has stuck with me since but I now know much more about it. The sequence, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89 etc, is made by adding the previous number onto the current number (starting with 1 and adding 0 to get a second 1). If you take a number in the sequence and divide it by the preceding one you’ll get something close to 1.618 (golden section). Notably, 8 and 13 are in the sequence (13:8=golden section ratio). The further you go in the sequence, the closer you get to 1.618 in dividing each number by the one before. In other words, the Fibonacci sequence is pretty much the golden section (it’s a rounded up/down version).
Not only that, you can start with any number, like 10, and add, say, 5 and repeat the process, (so 5, 10, 15, 25, 40, 65, 105, 170, 275, 445, 720, 1165) and, if we divide 1165 by 720 we get 1.61805555…. Golden section. Spooky! What’s strange is that you’re not using a fixed number to enlarge the previous – 10 is 2x5 but 445 is 1.618181818x275.
The two sets of lines below do use a fixed number to increase the type sizes. One is the golden section (right side) and the other uses 1.414 (the ratio of DIN paper measurements). Although the golden section sequence looks better hands down I wonder if it would still be most suitable to use the 1.414 sequence if you were working on A4/A3 (DIN) paper. Even lettering would be a consideration – lots of lettering is based on the square, but would it not be more logical to design type whose character shapes were similar to the shape of A4 paper?
I’ve used the Fibonacci sequence for a long while as a guide to my type sizes because, when I was just starting out in using type in my designs at uni, I read it would give me the most pleasing proportions. It has stuck with me since but I now know much more about it. The sequence, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89 etc, is made by adding the previous number onto the current number (starting with 1 and adding 0 to get a second 1). If you take a number in the sequence and divide it by the preceding one you’ll get something close to 1.618 (golden section). Notably, 8 and 13 are in the sequence (13:8=golden section ratio). The further you go in the sequence, the closer you get to 1.618 in dividing each number by the one before. In other words, the Fibonacci sequence is pretty much the golden section (it’s a rounded up/down version).
Not only that, you can start with any number, like 10, and add, say, 5 and repeat the process, (so 5, 10, 15, 25, 40, 65, 105, 170, 275, 445, 720, 1165) and, if we divide 1165 by 720 we get 1.61805555…. Golden section. Spooky! What’s strange is that you’re not using a fixed number to enlarge the previous – 10 is 2x5 but 445 is 1.618181818x275.
The two sets of lines below do use a fixed number to increase the type sizes. One is the golden section (right side) and the other uses 1.414 (the ratio of DIN paper measurements). Although the golden section sequence looks better hands down I wonder if it would still be most suitable to use the 1.414 sequence if you were working on A4/A3 (DIN) paper. Even lettering would be a consideration – lots of lettering is based on the square, but would it not be more logical to design type whose character shapes were similar to the shape of A4 paper?
Subscribe to:
Posts (Atom)
➔ Please do not copy any image from this blog without permission; I keep proof of ownership on all of my work ☺















































