Just to add to the earlier post, I thought I’d justify the need to spare a thought for the brightness of colours – by converting them to grayscale, for clarity.
The combinations of colours in the first two rows below are all created using the same grayscale values – namely those shown in the first 3 grey columns. So the variation in hue can, obviously, change dramatically while the percentage of black stays the same.
To demonstrate the variation in hues between colours of the same darkness (55% black in grayscale versions here) a long horizontal strip of swatches has been added – below it I have included the grayscale versions of these colours and, as can be seen, they’re all equal – 55% black.
In the first of the 4 text boxes below, we can see how awful text can look if its darkness is equal to that of the colour of its background. Usually, in these situations, there’ll be an ugly haze around the text because, in effect, the boundaries between the colours are so weak that they’re spilling into each other. Avoiding these problems is easily done by eye – most of the time. Sometimes, as with the last 3 images below, strong contrasts in hue make up somewhat for the completely equal brightness of two colours – but the outcome of their being combined is still dull/lifeless even when strong colours are used because of the equal grayscale values. So it’s, again, worth working in grayscale before colour, just to get the light/dark values of your work just right before adding colour.
Showing posts with label colour theory. Show all posts
Showing posts with label colour theory. Show all posts
Thursday, 1 April 2010
Wednesday, 31 March 2010
Grayscale versions of colour
Processes like logo design can begin to run away from the designer if they don’t consider one thing at a time – which is why, as the form of the logo is being drafted, the colour may be ignored for the time being. That would mean working in grayscale or even black and white.
The following information came from my finding the percentage of black in the grayscale version of some basic colours. For instance, in the table below we see the numbers 10 to 100; that’s 10% of cyan, magenta and yellow in the first column, running up to 100% of each in the last. Their grayscale versions are beside them – there’s 3% black in the grayscale version of 10% cyan, for instance. The grayscale version of a colour, in effect, tells us how deep/dark it appears to the eye – this, however, is NOT to say that blue doesn’t recede on the page more than red – light and dark is not the same as near and far.
In checking the grayscale values for colours it can sometimes be surprising to find that one is darker than another, and it’s good practice to consider how the hue and the brightness are working in colours. Going back to logo design, working primarily in grayscale will allow you, firstly, to focus on form; secondly, it will force you to decide what should be dark and what should be light – choosing colours will then be down to matching their grayscale versions with the values you’ve chosen and picking a hue that will make the right impact – quiet/loud/vibrant/reserved. Something to think about anyway.
The following information came from my finding the percentage of black in the grayscale version of some basic colours. For instance, in the table below we see the numbers 10 to 100; that’s 10% of cyan, magenta and yellow in the first column, running up to 100% of each in the last. Their grayscale versions are beside them – there’s 3% black in the grayscale version of 10% cyan, for instance. The grayscale version of a colour, in effect, tells us how deep/dark it appears to the eye – this, however, is NOT to say that blue doesn’t recede on the page more than red – light and dark is not the same as near and far.
In checking the grayscale values for colours it can sometimes be surprising to find that one is darker than another, and it’s good practice to consider how the hue and the brightness are working in colours. Going back to logo design, working primarily in grayscale will allow you, firstly, to focus on form; secondly, it will force you to decide what should be dark and what should be light – choosing colours will then be down to matching their grayscale versions with the values you’ve chosen and picking a hue that will make the right impact – quiet/loud/vibrant/reserved. Something to think about anyway.
Sunday, 28 March 2010
Josef Albers: Interaction of Color
I got half way through this book today, which, before now, would sit on my desk staring at me while I got other loose ends tied away. Great book – shame about the spelling of ‘colour’. It’s about more than just the colour illusions we’ve all seen before – understanding them, and reacting with that knowledge, will make for even more measured and reasoned design.
I liked his following opinion of colour-handling…though it is questionable in some ways: ‘good colouring is comparable to good cooking. Even a good cooking recipe demands tasting and repeated tasting while it is being followed. And the best tasting still depends on a cook with taste.’ It’s definitely true that colour should be revisited/manually controlled – as the following examples will prove. Consistency in colour values, for instance, does not always equal consistency in colour to the eye (in other words, the same colour can appear different due to a variety of reasons, like light). In many circumstances, if the creator wants, say, two pieces of type to appear the same colour visually, it may be necessary to make them slightly different colours (if, say, their backgrounds are of different colours).
I liked his following opinion of colour-handling…though it is questionable in some ways: ‘good colouring is comparable to good cooking. Even a good cooking recipe demands tasting and repeated tasting while it is being followed. And the best tasting still depends on a cook with taste.’ It’s definitely true that colour should be revisited/manually controlled – as the following examples will prove. Consistency in colour values, for instance, does not always equal consistency in colour to the eye (in other words, the same colour can appear different due to a variety of reasons, like light). In many circumstances, if the creator wants, say, two pieces of type to appear the same colour visually, it may be necessary to make them slightly different colours (if, say, their backgrounds are of different colours).
Here are a few interesting examples of colour interaction I’ve read about so far:
In the second image below (click on it for a proper view), there is a black rectangle with a grey centre square, and a white rectangle with a grey centre square. This is an example of making two different colours appear the same. The grey squares are repeated below the image, side-by-side. See the difference?
Similarly, (and excuse the imperfection of this one, as it was my own attempt and not a copy from the book), in the third image we see a bright pink rectangle and pale purple rectangle, each with an orange centre square. The orange appears the same colour in each if you gaze at the centre of the image. For clarity, the orange squares are repeated below, and the difference is again clear.
Then there is the ability of colours to make one colour look like two. The last pair of images demonstrate this – two rectangles, one purple, the other brown, appear to have centre squares whose hue equals that of the opposite large rectangle. Brown with purple square, purple with brown square. In reality, though, the small squares are the same colour, as repeated underneath the image.
The main point behind all this is that influencing colours (dominating colours/colours with the largest area or presence) will SUBTRACT their own hue from those colours that they influence. Put a certain green shape inside a large yellow area, for instance, and that green will lose some of the yellow to its appearance…thus becoming more blue. Or, simply, a black background makes a colour lighter (it loses its darkness) as a white makes colour darker.
So?? Well, for typographers, this lesson should be an important one. If the colour of your type always needs to be the same colour in a particular publication, it is only the visual level of colour that matters to the audience – so you should put trust in your own eyes and adjust the type colour ever so slightly to allow for backgrounds of strong colour-influence. As Albers would say, stop cooking and have a taste now and then.
Phi Colours
I’ve looked at using Phi, the golden section, as a means of selecting colours and so far it seems very worthwhile to explore – there are so many variables to play around with, all the while using the same proportions. You could, for instance, draw a golden rectangle on top of a colour wheel and take the colours marked by the four corners. A similar test could be made with a the Phi triangle and pentagon. I plan to post more on this when I can.
The images below show a simple start to choosing colours with the golden section – Fibonacci’s sequence is a simplified version which avoids decimal numbers and has therefore been used here.
I took white as a base and a blue colour…reducing the blue by equal steps 100 times down to pure white. You can then make a selection of colours using the Fibonacci sequence – 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89. Not much point using the first few, as there’ll be very little difference between them. Also, even though I started with my 100th shade of blue in the sequence of 100 steps, I don’t use it in the end because it does not relate to those selected with the Fibonacci sequence – the number after 89 is 144…not 100. You would, ideally, start at white and add an equal amount of blue at each step.
Anyway, the result looks like a quite pleasing group of colours with good contrast and yet comfortable similarity. The trick is, I think, to go with the largest contrast first (1:89 in this case) and then take the neighbouring selections of each number– 55 and 2, instead of, say, a selection of numbers 1, 21 and 55 (they don’t link up in the sequence). In geometry things begin to lose clarity a little if you don’t use numbers that link up within the proportional sequence so it most likely would work the same way with colour.
The images below show a simple start to choosing colours with the golden section – Fibonacci’s sequence is a simplified version which avoids decimal numbers and has therefore been used here.
I took white as a base and a blue colour…reducing the blue by equal steps 100 times down to pure white. You can then make a selection of colours using the Fibonacci sequence – 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89. Not much point using the first few, as there’ll be very little difference between them. Also, even though I started with my 100th shade of blue in the sequence of 100 steps, I don’t use it in the end because it does not relate to those selected with the Fibonacci sequence – the number after 89 is 144…not 100. You would, ideally, start at white and add an equal amount of blue at each step.
Anyway, the result looks like a quite pleasing group of colours with good contrast and yet comfortable similarity. The trick is, I think, to go with the largest contrast first (1:89 in this case) and then take the neighbouring selections of each number– 55 and 2, instead of, say, a selection of numbers 1, 21 and 55 (they don’t link up in the sequence). In geometry things begin to lose clarity a little if you don’t use numbers that link up within the proportional sequence so it most likely would work the same way with colour.
Subscribe to:
Posts (Atom)
➔ Please do not copy any image from this blog without permission; I keep proof of ownership on all of my work ☺



















